How may we help you?

Released on 08.12.2023

1.1.6 Contains the following software:

Mac OS - Firmware 1.14, Control Panel 1.04, Unified Driver 4.6.0  (for hw rev 1,2)
Windows - Firmware 1.14, Control Panel 1.04, driver_usb-orion32_gen4 5.0.4 (for hw rev 1,2)

New in this release:

1. Fixed an issue with the meters section of Orion32+Gen4 not reverting to the default settings for the peak meters after visualizing other channels and closing the CP.
2. Fixed an issue with the line-out signal from Orion32+Gen4 does not go to the Line-in of another device after factory reset unless sample rate is changed.
3. Fixed an issue with front panel of Orion32+Gen4, the peak meters visualized in the left display don't return to default view after factory reset.
4. Fixed an issue with the monitor output of Orion32+Gen4 not working unless an activation code is added for the Surround feature.
5. Fixed an issue with some functions of Orion32+Gen4 not working after factory reset: monitor out and line out signal.
6. Fixed an issue with the ADAT IN clocking  not working.
7. Fixed an issue with the14 dBu setting for the Line Out Trim set on the front panel not highlighted there.
8. Fixed an issue with several settings for Line In Trim set on the front panel of Orion 32+Gen4 not behaving properly.
9. Fixed an issue with the brightness setting in the CP of Orion32+Gen 4 having a minimum value of 20%, and on the front panel the minimum value of 5%.
10. The Routing menu in the front panel of Orion32+Gen4 the Surround In and Surround Out channels have been exchanged.
11. Fixed an issue of playback stopping when switching between hardware presets.
12. Fixed an issue with a black strip appearing in the peak meters on the front panel of Orion32+Gen4 when regulating gain up and down.
13. Fixed an issue with the the meters section of Orion32+Gen4 not reverting to the default settings for the peak meters after visualizing other channels and doing a factory reset.
14. Fixed the issue when switching between 24 & 32 USB channels on the Orion 32+ GEN4 freezing the Control Panel.
15. Fixed an issue with the surround level mute functionality not working,
16. Orion 32+ GEN4 now sends and receives audio signal via MADI without issue.
17. DIM functionality now affects both POST and PRE surround peak meters

Fixed an issue with Firmware 1.11 from Bundle 1.1.3 for the Orion32+ GEN 4 causes the device's front panel to glitch out and make it undiscoverable in the Launcher

MRC RELATED:

1. Fixed an issue with the BM button on the MRC activating Bass Management functionality on surround formats that shouldn't have it.
2. Fixed an issue with  Orion GEN4 / Galaxy 32 SC Monitor Out level jumps from 0 to -inf dB when changed from MRC.
3. Fixed an issue with the EQ section turning off the light of the specific channel on the MRC when you bypass it.
4. Fixed an issue with MRC lights not glowing according to the Surround channel configuration.
5. Fixed an issue with the lights of the MRC buttons not working and the Solo button functionality not working with Orion32+Gen4